Beurer FC 55 Instrucciones De Uso página 11

5. DEVICE DESCRIPTION
The associated drawings are shown on page 3.
Handle
1
ON/OFF/speed button
2
LED indicator lamp
3
Cleaning attachment: For daily cleansing
4
Exfoliation attachment: For revitalising exfoliation
5
Mains adapter
6
6. INITIAL USE
6.1 Charging the body brush battery
Charge the battery of the body brush for 2 hours before initial
operation.
WARNING
Before starting the charging process, make sure that your hands
and the mains adapter are dry.
To charge the body brush battery, proceed as follows:
1. Ensure that the body brush is switched off.
2. Connect the body brush to the mains adapter.
3. Insert the mains adapter into a suitable socket.
4. While charging is in progress, the LED lights for the ON/OFF/
speed button light up alternately in a circle. Once the body
brush battery has been fully charged, the LED lights for the
ON/OFF/speed button light up permanently.
6.2 Choosing and fitting a brush attachment
The device has 2 different attachments.
Cleaning attachment: For daily cleansing
Exfoliation attachment: For exfoliating in the shower and in the
bath in order to gently remove excess skin cells
1. Carefully fit your desired attachment onto the body brush as
shown until you can hear and feel it click into place.
2. To remove the attachment again after use, pull it carefully off
the body brush.
C
6.3 Attaching the handle
You can optionally also fit a handle onto the body brush. Hard-
to-reach areas (e.g. the back) are easier to reach by using the
handle.
To fit the body brush onto the handle, screw the body brush into
the handle as shown.
D
7. USE
7.1 Cleansing treatment function
The cleansing treatment function using the cleansing attachment
is ideally suited to daily cleansing of the skin.
To start the cleansing treatment function, proceed as follows:
1. Ensure that the cleansing attachment is attached to the bo-
dy brush.
2. To switch on the body brush, press the ON/OFF/speed button.
The cleansing attachment starts to rotate. We recommend that
you start by using the slow speed setting. To choose the fast
speed setting, press the ON/OFF/speed button again.
3. Gently move the body brush in circular motions over your skin.
Start with your feet and work upwards from there in the direc-
tion of your legs, buttocks, stomach, back, chest, arms and
hands. Do NOT use the body brush on the face or in the pubic
area. If you have problems reaching your back with the body
brush, use the additional handle. If the treatment is unpleasant,
stop using the device or reduce the speed setting.
To ensure comfortable treatment, do not press the rota-
ting brush attachment too firmly on to the skin. Treat each
section of skin for a maximum of 20 seconds.
4. To end the cleansing treatment function, press the ON/OFF/
speed button again. The body brush switches itself off.
7.2 Exfoliation treatment function
The exfoliation treatment function using the exfoliation attach-
ment is ideally suited for gentle exfoliation to remove dead or dry
skin cells. Do not carry out treatment more often than 2x a week.
Always carry out the exfoliation treatment in the shower or bath.
To start exfoliating, proceed as follows:
1. Ensure that the exfoliation attachment is attached to the bo-
dy brush.
2. Moisten the exfoliation attachment.
3. Moisten your skin.
4. Apply a shower gel or cleansing lotion directly onto the bristles
of the exfoliation attachment.
5. To switch on the body brush, press the ON/OFF/speed button.
The exfoliation attachment starts to rotate. We recommend that
A
you start by using the slow speed setting. To choose the fast
speed setting, press the ON/OFF/speed button again.
6. Gently move the body brush in circular motions over your skin.
Start with your feet and work upwards from there in the direc-
tion of your legs, buttocks, stomach, back, chest, arms and
hands. Do NOT use the body brush on the face or pubic area.
If you have problems reaching your back with the body brush,
use the additional handle. If the treatment is unpleasant, stop
using the device or reduce the speed setting.
To ensure comfortable treatment, do not press the rota-
ting brush attachment too firmly on to the skin. Treat each
section of skin for a maximum of 20 seconds.
B
7. To end the exfoliation treatment function, press the ON/OFF/
speed button again. The body brush switches itself off.
8. Cleanse your skin thoroughly with water to remove any resi-
due from your skin.
9. Pat your skin dry with a towel and then apply a moisturising
cream using even, circular movements.
10. Clean the attachment thoroughly with water after each use.
8. CLEANING AND MAINTENANCE
Cleaning the attachments
IMPORTANT
Before beginning cleaning, pull the attachment off the body
brush.
• Clean the attachment thoroughly with water after each use.
Cleaning the body brush
• Clean the body brush using only the methods specified.
• Clean the body brush after use with a soft, slightly damp
cloth. If it is very dirty, you can also moisten the cloth with
a mild soapy solution. Do not use any abrasive cleaning pro-
ducts.
11