Kratki PATIO SLC Manual De Instrucciones página 31

INSTALLATION Of THE APPLIANCE AND STORAGE Of CYLINDERS SHOULD BE IN ACCORDANCE
WITH APPLICABLE REGULATIONS
NEVER USE ANY SPARE PARTS THAT ARE NOT SUPPLIED OR RECOMMENDED BY THE MANUfAC-
TURER.
The device has an open combustion chamber without the option to connect it to a flue. The PATIO
SLC heater is sold with a pre-installed gas control system, but before the first use it is recommended
to check the tightness of the system due to the possibility of its unsealing in transit. All instructions
for the proper connection of the system, installation of walls, doors and glazing can be found below
in the following section.
COMMENTS ON MOVING THE DEVICE:
This device is designed to be easily moved. Before moving the heater, make sure that the gas supply
has been shut off and the hose has been disconnected from the cylinder. Moving the unit while it is
in operation is strictly prohibited.
Any European gas cylinders up to 11 kg in weight and no wider than 33 cm and no taller than 65
cm are compatible with this device.
INSTALLATION RULES
Installation should be carried out in accordance with the requirements of the laws of the country or
region. In the absence of such regulations, the rules in this manual and fire safety rules should be
followed.
This device has been tested for quality and safety and certified by a notified institute.
NOTE!
The heater is designed to work with an 11kg gas cylinder designed to store a mixture of propane,
propane-butane gases. The flexible connection cable should be designed for liquefied petroleum
gas!
The device is sold with complete automation and cables connecting the main and control burner to
the controller. Do not use replacement system components other than those installed or supplied by
the manufacturer.
SELECTING THE LOCATION Of THE PATIO SLC GARDEN HEATER
The PATIO SLC gas heater is a mobile device, capable of moving to any location. However, there are
limitations that must absolutely be observed. The device, due to the possibility of high temperatures
on its external surfaces, especially the windows, should be kept away from flammable materials, and
due to the open combustion chamber without the possibility of connection to flue pipes, it should be
used in open spaces or in well-ventilated rooms. It is DEFINITELY PROHIBITED to place the appliance in
any position other than vertical.
Tips for proper and safe installation of the device:
- Connect the regulator to the liquid gas cylinder so that the anti-tilt valve is in the vertical position.
EN
31