Overmax Camspot 4.0 PTZ Manual De Usuario página 15

2. Registering a new user (fig. 2 and 3)
•
To register for the application, click on the „Register" box and
then read and accept the Privacy Policy.
•
Enter your email address to receive your verification code.
•
Enter your verification code in the blank field.
•
Enter your individual password and select "Finish".
3. Logging in to an existing account
•
In order to log in to an existing account, select "Log in using
an existing account" (fig. 2).
•
Select the appropriate country/region.
•
Enter your email address and password, then log in.
4. Manually adding the device in the application
(fig. 4)
The product only supports 2.4GHz Wi-Fi and does not support 5GHz
Wi-Fi. Before setting up Wi-Fi, set your router parameters. The
Wi-Fi password should not contain special characters.
•
Make sure the router and camera are as close together as
possible to allow for quick setup of the device.
•
Connect your mobile device to the local Wi-Fi network to which
the camera will be connected, then select "My home". Select
"Add device" and "Add manually", then select the "Camspot
4.0 PTZ" device.
•
Select your Wi-Fi network and enter your password.
•
You can add the device using Auto Scan, which allows your
phone to automatically search for nearby Wi-Fi enabled
devices.
•
Press and hold the „Reset" button for 5 seconds to restore the
factory settings. Click „Next step" and continue.
•
To pair the camera, scan the QR code from the phone screen
through the camera lens, holding the camera 15-20cm away. Try
to hold your mobile phone in a stable position while scanning.
EN