Mc Haus 1230011 Manual Del Usuario página 48

PANEL DE CONTROL
SLEEP
TIMER
SWING
WIFI
SLEEP
TIMER
REMOTE CONTROL
94
AUTO
COOL
DRY
FAN
LOW MID HIGH
HEAT
FAN MODE
SWING POWER
Pressing this button will Used for automatic
switch the appliance on oscillation system.
or off.
Press this button to select the
different operating modes.
Used to set the room
temperature and timer.
This button is used to select
the fan speed in sequence.
Used to activate the To select/deselect the
automatic on/off.. mode of operation.
CONTROL PANEL OPERATIONS
Turn on the unit
- Plug in, then the unit beeps.
- Press the button , then the unit turns on. The led displays the room temperature and operates
in automatic mode.
Select the operating mode
- Press the button to select the desired mode shown below.
auto cool dry fan
Set the temperature
- The temperature can be adjusted within a range of 15ºC to 31ºC by 1ºC.
- Press or to increase or decrease the temperature by 1ºC by pressing once.
The led unit displays the target temperature for 5 seconds and then displays the room temperature.
Select the fan speed
- Press the button to select the desired mode as shown below
low mid high
On/Off
- When you press the button a second time, the unit will beep and turn off.
Swing
- Press this button to set the swing.
heat
95