Cameo OPUS SP5 PLUS Manual De Usuario página 16

CONTROL MENU (Control)
SETTING DMX START ADDRESS (DMX Address)
Starting from the main display, press ENTER to enter the main menu. Use the and controls to
select the control menu Control and press ENTER. Use UP and DOWN to select the menu item
"DMX Address" and confirm by pressing ENTER. Now set the desired DMX start address using the
LEFT and RIGHT control panels and confirm with ENTER (highest value depends on the activated
DMX mode). Press MODE twice to return to the main display, the selected DMX start address is
now shown in large letters on the display when DMX mode is activated.
SET DMX MODE (DMX Mode)
Starting from the main display, press ENTER to enter the main menu. Use the and controls to
select the control menu Control and press ENTER. Use UP and DOWN to select the menu item
"DMX Mode" and confirm by pressing ENTER. Select the desired DMX mode again with UP and
DOWN and confirm the selection with ENTER. Press MODE 2x to return to the main display, the
selected DMX mode is now activated. Tables with the channel assignment of the different DMX
modes can be found in these instructions under DMX CONTROL.
NETWORK SETTINGS (Network)
Starting from the main display, press ENTER to enter the main menu. Use the and controls to
select the control menu Control and press ENTER. Use UP and DOWN to select the menu item
"Network" and confirm by pressing ENTER. For information on the network settings, please refer
to the table below. Confirm all network setting changes with ENTER.
16