Publicidad
STEP 4- ATTACH PANEL TO MOUNT
Hang with monitor attached
Cuelgue con el monitor adherido.
Accrochez avec le moniteur installé.
STEP 4- ADJUST TILT TENSION/ POST INSTALLATION LEVEL
Locking mechanism
Mecanismo de fijación
Mécanisme de verrouillage
Secured Monitor Plate to
Arm using 2 Phillips head
screws. Tighten only to
snug tension.
ARM ASSEMBLY, LEVEL, AND TILT
Flat panel can be leveled
(+/-3 degrees) as needed. If
security screws are ten-
sioned tight it will be difficult
to adjust leveling.
Heavy, Assistance
Required
TRES LOURD ! Cette etape
requiert deux personnes
!PESADO! Necesitara ayuda
para
realizar esta operacion
a) Rotate handle clockwise
as far as possible.
b) Pull handle to side later-
ally (against spring tension)
and rotate counter- clock-
wise as far as possible.
c) Repeat steps a) and b)
until panel holds desired tilt.
P10
Publicidad
