Treating the cheeks and jaw
Position the light area
point, trigger a pulse and move from one side of the cheek or jaw to the
other.
Treating the neck and chin
Position the light area
point, trigger a pulse and move from one side of the neck or chin to the
other.
Care after facial treatment
• Apply a soothing lotion such as aloe vera.
• Do not use exfoliators, whitening lotions or similar products for at least 24 hours, as
this could irritate the treated skin.
• For at least 48 hours after the treatment, avoid more than 15 minutes of direct exposure
to the sun. If the treated skin is exposed to sunlight during this period, it is essential to
apply sun protection with SPF 30 or higher.
• Do not remove hair on the treated areas using wax or tweezers.
Remember that it may take a complete hair growth cycle to achieve long-lasting
hair removal.
7.3 Application cycle
For body treatment:
Week 1 to 2:
Week 3 to 5:
From week 6:
For facial treatment:
• The first 6 hair removal sessions using the device should be performed around two
weeks apart.
• The 7th to 12th hair removal sessions using the device should be performed around
four weeks apart. Afterwards, you may use the device from time to time as necessary,
until long-lasting results are achieved. This corresponds to the recommended
treatment plan that has proven to achieve the best results. You can, however, create a
different personal treatment plan and still achieve satisfactory results.
of the device as shown in the figure. At each
1
of the device as shown in the figure. At each
1
Use three times a week
Use twice a week
Use once or twice a month (repeat as necessary)
39