auna lytl Manual De Instrucciones página 9

Product Set Up
1 - Take the carry cot out. (1)
2
- A "click" sound means the support mount is
attached completely. (2)
3
- Pull up the canopy as illustrated while pressing the
buttons on both sides. (3)
4
- Check to make sure the handle is secure before
placing the child in the carry cot. (4)-1
Make sure that the handle is in the correct position
of use before carrying or lifting.
Mattress cover can easily be removed to wash.
5
- Attach the cover to the carry cot with zippers on
either side. (5)
6
- To fold the carry cot, release the support mounts
(6)(7) and fold the canopy while pressing the
handle adjustment button. (8)
Product Use
Canopy
1
- To use the dream drape™, secure it to the two
sides of carry cot with magnets. (9)
Store the dream drape™ under the canopy when
not in use. (10)
2
- Fold the rear panel of the canopy up, and the rear
panel of the carry cot down for more ventilation.
(11)
Carry Cot Attachment on
Stroller or Stroller Frame
The TRVL Adapter used with TRVL for attaching LYTL
carry cot.
1
- To remove the armbar, press the armbar release
buttons, and lift the armbar up. (12)
2
- To attach the adapters, place the post adapters
on the seat mounts. A "click" sound means the
adapters are attached. (13)
3 - To open the infant carrier lock, slide the latch out
(14).
4
- To attach carry cot, place the carry cot on the post
adapters. A "click" sound means the carry cot is
attached. (15)(16)
The carry cot angle can be adjusted with our
adjustable adapters. (15)
5 - To remove the carry cot, press the release buttons
on the side of the carry cot (17)-1 and lift up (17)-2.
6
- To remove the adapters, press the adapter release
buttons (18)-1 and lift up (18)-2.
Remove the carry cot before folding.
7 LYTL instructions
The post adapters used with TRIV next and IXXA for
attaching LYTL carry cot.
1
- Secure the post adapters on the stroller seat
mounts. A "click" sound means the post adapters
are attached. (19)
2 - Place the carry cot down until it latches into place.
The carry cot is securely attached with a positive
"click". (20)
ALWAYS remove the stroller seat before using the
carry cot.
DO NOT fold the stroller when the carry cot is still
attached.
3 - The carry cot angle can be adjusted with our
adjustable adapters. (21)
4
- When used with rear facing, the letters on the
post adapters are the same as those on the frame
plastic. (22)
5
- When used with front facing, the letters on the
post adapters are opposite to those on the frame
plastic. (23)
6
- To remove the carry cot, press the release buttons
(24)-1 and lift up (24)-2.
Rain Cover
To use the rain cover, place it over the carry cot. (25)
ALWAYS check ventilation when the rain cover is
on the product.
ALWAYS check that the rain cover has been
cleaned and dried before folding.
Soft Goods Removal
1
- Unzip the carry cot cover to remove it. (26)
2
- Take out the mattress pad and remove the cover.
(27)
3
- To remove the canopy, unzip the zippers on both
sides (28) and then the zipper under canopy (29).
Pull the dream drape™ out so the zippers are more
visible.
The canopy is not removable on certain models.
4 - To remove the carry cot lining. Unzip the zippers
on the carry cot. (30)
Cleaning and Maintenance
Clean the frame, plastic parts, and fabric with a damp
cloth, but do not use abrasives or bleach. Do not use
silicon lubricants as they will attract dirt and grime. Do
not store the carry cot in a damp place.
To ensure long-lasting use, wipe this product off with a
soft, absorbent cloth after using it in rainy weather and
before storing away.
Refer to the care labels attached to the soft goods for
washing and drying instructions.
It is normal for fabric to color from sunlight and to show
wear and tear after a long period of use, even when used
normally.
For reasons of safety, only use original Nuna parts.
Check regularly if everything functions properly. If
any parts are torn, broken, or missing, stop using this
product.
NUNA International B.V. Nuna and all associated logos are trademarks.
LYTL instructions 8