Publicidad
Display Installation
1.
1a. Install display bracket using
"A" (4) M10 x 16mm bolts
1b. Install shoulder washers to the
display brackets using "D" (4)
5/16-18 bolts
2.
Two people are needed to install the display on the stand using the supplied Cisco lifting handles.
Position shoulder washers and screw into the "key hole" slot as shown and continue holding dis-
play. Then Immediately use "D" (2) 5/16 x 1/2 screws to affix the mounting brackets to the bracket
as shown. Tighten all screws firmly. Cisco lifting handles can be removed after installation.
Tip: With larger screens it is more
accessible to install locking screws
with the stand all the way down and
standing on a ladder.
LIMITED WARRANTY FOR COMMERCIAL VIDEO DISPLAY STANDS AND MOUNTS
Salamander is proud to stand behind our products with industry-leading warranties. Should you ever encounter
any problem with your Salamander product, let us know. We are here to make it right. 1.800.535.5659 - 860.761.9500
Full warranty including limitations and warranty claim information may be found at:
www.salamandercommercial.com/warranty
Salamander Designs - Electric Lift Wall Display Stands 55"
1a
A
www.salamandercommercial.com
1b
B
501-673 [6.22]
page 10 of 24
1a
A
Publicidad
