Publicidad
Idiomas disponibles
Idiomas disponibles
ADJUSTING THE CONTROLS IN EMS MODE
10. Steps to Set a EMS Program
The settings can be adjusted according to the following steps.
f. Turn on the Intensity
After the electrodes are placed firmly on skin and the lead wires are plugged in the socket of device, turn the
on/off control clockwise. The menu will reveal on LCD. Notice the indication of power and function on the
LCD.
g. Select Mode
There are two EMS modes of option, S(Synchronous) or A (Alternate). Select a mode by pressing the "Mode"
control. When an EMS mode is selected, the LCD shows "EMS" on the top. After a mode is selected, press
"SET" control to enter the next setting. You may adjust the setting only when it is flashing. Then press the
"Increment" or "Decrement" control to change the settings.
h. Set Ramp Time
The ramp time controls the time of output current that increase from 0 to the setting level, and from the
setting value to 0. When the ramp time is set, each contraction may be ramped up and down in order that
the signals come on and come off gradually and smoothly. The ramp time is adjustable from 1 to 8 seconds.
i. Set On Time
The On-Time controls the time of stimulation. By pressing the "Set" control, the contraction time can be
adjusted. Both channels' stimulation is cycled on and off by the contraction and relaxation settings. The
range is adjustable from 2 seconds to 90 seconds.
As the "ON" time includes the ramp up and ramp down time, the setting of it should be no less than two
times the "Ramp" time. (ON TIME ≥Ramp up + Ramp down)
11
Publicidad
