IGNITION
Put on the brazier a lighting-cube or a small quantity of paper, around 0,5 kg of wood in
•
small pieces. By means of the tools, which are furnished with the appliance, completely
open the primary air (thermo regulator), open the fume valve and close the oven cooking
valve. Light the paper and close the door.
When the appliance is completely lighted, add some larger wood pieces. Repeat this
•
operation till when the appliance has reached the " Hourly Charge " as indicated in the
technical details, than regulate the primary and secondary air as indicated in the chapter
Regulations
The equipment should be loaded when the flame is low to avoid fumes or combustion
•
products escape.
The proper functioning of the appliance is ONLY WITH OPEN COVER.
Close the cover when the machine is cold.
LOADING - TO RESTART WITH EMBERS ( Moderates flames )
In case of starting with embers, go on as follows :
Thicken the embers on centre foyer .
•
Open totally the prime and secondary air and the fumes valve
•
Wait few minutes till in the brazier appears a flame sufficient for a new starting.
•
Load some wood pieces of small dimensions and wait for the complete starting.
•
Replace the primary & secondary air and fumes valve in the normal position as indicated
•
in the chapter "Regulations".
Radiant plate
Plate frame
Secondary air
Fire Door
Ash Door
Primary Air
IT IT IT IT- - - - GB
GB- - - - FR
FR- - - - ES
ES mod. 702A-G -702A-GL 2019
GB
GB
FR
FR
ES
ES
31/76
2019 EN13240
2019
2019
Cats iron rings
Fumes Valve
Oven Door
Accessories Door
Fig.1