Preparation; Safety Instructions - Peimar MIRUS LINE Manual De Usuario

2.1 Safety instructions

•
•
•
•
•
•
•
•
•
•
Chapter 2 - Preparation
DANGER
There is possiblity of duing to electrical shock and high
voltage may cause death.
Do not touch the operating component of the inverter, or it
might result in burning or death.
To prevent risk of electric shock during installation and
maintenance, please make sure that all AC and DC terminals
are plugged out.
Do not touch the surface of the inverter while the housing is
wet, or it might lead to electrical shock.
Do not stay close to the inverter while there are severe
weather conditions including storm, lighting, etc.
Before opening the housing, the Peimar inverter must be
disconnected from the grid and PV generator; you must wait
for at least five minutes to let the energy storage capacitors
fully be discharged after disconnecting from power source.
WARNING
The installation,service, recycling and disposal of the inverters
must be performed by qualified personnel only in compliance
with national and local standards and regulations.
Any unauthorized
product functionality of any form may cause lethal hazard
to the operator, third parties, the units or their property.
Peimar is not responsible for the loss and these warranty
claims.
The Peimar inverter must only be operated with PV generator.
Do not connect any other source of energy to the Peimar
inverter.
Be sure that the PV generator and inverter are well grounded
in order to protect safety of people's life and property.
actions including
59
EN
modification of