Peimar MIRUS LINE Manual De Usuario página 86

Note: the configuration of used Grid compliance must be done at the first power
on, before the inverter starts operating.
If users can not locate the corresponding country, please abort the setting and
contact Peimar assistance. An incorrect choice leads to malfunction of the device.
6.2.2 State
After set Grid compliance and the loading, inverter automatically displays its
operation status: Normal, Wait, Fault, Update.
Normal
Wait
Fault
Update
The inverter in normal (function) operation
The inverter in stand-by state
A fault occurs during operation
The state of updating firmware
86
EN