Sony Trinitron PGM-100P1MD Manual De Instrucciones página 22

Table of Contents
Features ................................................................... 23
Location and Function of Parts and Controls ..... 24
Front Panel ..................................................... 24
Rear Panel ...................................................... 25
Preparations ............................................................ 26
Connecting the AC Power Cord ..................... 26
Connecting a Cable to the BNC Connector ... 27
Connecting to a Computer ............................. 27
Adjustments ............................................................ 28
Adjusting the Picture Brightness .................... 28
Adjusting the Picture Contrast ....................... 28
Adjusting the Picture Location ....................... 28
Adjusting the Picture Size .............................. 29
Adjusting the Picture Rotation ....................... 29
Adjusting the Pincushion Distortion .............. 29
Adjusting the Color Temperature ................... 30
Resetting ......................................................... 30
Other Operations and Functions ..................... 30
Specifications ........................................................... 31
Troubleshooting ...................................................... 32
22
Precaution
On safety
• Operate the monitor on 100 to 120 V AC or 220 to
240 V AC.
• The nameplate indicating operating voltage, power
consumption, etc., is located at the rear.
• Should any solid object or liquid fall into the cabinet,
turn off the power, unplug the monitor and have it
checked by qualified personnel before operating it
any further.
• Do not drop or place heavy objects on the power
cord. If the power cord is damaged, turn off the
power immediately. It is dangerous to use the
monitor with a damaged power cord.
• Connect the power cord to the wall AC outlet.
For connecting the power source, see "Connecting
the AC Power Cord" on page 26.
• Before turning off the mains supply switch, wait for
at least 30 seconds after turning off the power to
allow for the discharging of static electricity on the
CRT surface.
• After the power is turned on, the CRT is
demagnetized for approximately 5 seconds. This
generates a strong magnetic field around the bezel
which may affect the data stored on magnetic tape or
disks near bezel.
Keep such magnetic recording equipment and tapes/
disks away from the monitor.
• The wall AC outlet should be installed near the
monitor and be easily accessible.
On installation
• Do not place a heavy object on the monitor.
• Allow adequate air circulation to prevent internal
heat buildup.
Do not place the monitor on surfaces (rugs, blankets,
etc.) or near materials (curtains, draperies) that may
block the ventilation holes.
• Do not install the monitor in a location near heat
sources such as radiators or air ducts.
• Do not install the monitor near equipment generating
magnetism, such as a converter or high voltage
power lines.