Descargar Imprimir esta página

John Bunn JB0112-164 Manual De Usuario página 14

Compresor de nebulizador
Ocultar thumbs Ver también para JB0112-164:

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING
If your Nebulizer Compressor fails to function, consult the
following Troubleshooting guide. If the problem persists,
consult your Graham-Field authorized distributor.
Problem
Device doesn't
operate
Nebulization is
weak
JB0112-164-INS-LAB-RevC14
Cause and Solution
Check if plug is properly fit into a grounded electrical outlet.
When device has been run continuously for more than 30 minutes
just before using, auto-shut-down may have been activated by the
built-in thermal protector; ensure that device is OFF for at least 30
minutes before next usage.
Check for proper electrical voltage.
Check tubing for blockage or air leakage at connection to Neb-u-Tyke
compressor or nebulizer cup; replace as needed.
Check that the nebulizer cup is properly assembled and not
damaged. If there is any damage, replace as needed.
Check if filter is dirty; replace filter as needed.
14

Publicidad

loading

Este manual también es adecuado para:

Neb-u-tyke rr train