Publicidad
Idiomas disponibles
Idiomas disponibles
EN
USING THE DEVICE
1. Insert power cable's plug (8) into an earthed electrical socket. The indicator lamp (4) starts blinking.
2. Steamer will start heating up and be ready after approx. 30 seconds. This is signalled by indicator
lamp (4) lit continuously.
3. When the device becomes ready for use, press steam activation button (5). Before starting ironing,
direct the steam away from the garment for a few seconds because the initial stream may contain
drops of water.
4. Do not release the steam button during steam ironing
(5). It may be blocked using a lock in the button (see
fig. 1).
5. If you are not using a brush accessory during steam
ironing, keep the steamer's heel at the distance of 5 cm
from the fabric.
6. Move the steam heel towards garment during ironing.
At the same time pull the garment's sides to straighten
it.
NOTICE! Do not direct the steam directly on metal ac-
cessories. Be careful when ironing around metal accessories.
7. After completion of steam ironing release steam button (5).
To make ironing of garment elements easier, hang them on the coathanger.
In case of shirts button the first button at the collar to make straightening of the fabric
easier.
NOTICE! Do not hold the garment with naked hand during steam ironing. Do not place steam
heel on the power cable after use.
Small wet points may appear during steam ironing. A garment may become slightly moist
because of steam.
Leave the garment after ironing to dry before putting it on or putting it away.
NOTICE! Steamer is designed for use in an upright position. Avoid steam ironing in horizontal
position and do not place the steamer upside down.
NOTICE! The water pump makes silent buzzing sound during work after pressing the steam but-
ton. The sound of operating pump increases when there is no water in the tank. Refill the water
tank.
The steamer has automatic switch off function. It is activated when the device is inactive
for a longer while. The activation of this function is signalled by blinking of the indicator
(4).
NOTICE! The steamer produces water vapour at an extremely high temperature! Danger of
scalding. Do not direct steam on people or animals!
AFTER IRONING
1. Switch off the device using power switch (5).
2. Unplug the power cable's (8) plug from electrical socket.
3. Empty the water tank (7).
4. Store the device in a safe location, in an upright position and wait for the steamer to cool down.
22
fig. 1
Publicidad
