MPM MZP-01 Manual De Instrucciones página 23

CLEANING AND MAINTENANCE
NOTICE! Never immerse the device in water and do not rinse it in tap water.
1. Wipe off any sediment from the steam heel (2) using a moist cloth and a liquid cleaning agent free
of abrasive elements.
NOTICE! To protect the heel surface unscratched, do not place the device near any metal ob-
jects. Do not use scratchpads, vinegar nor any other chemical agents for cleaning the steamer.
2. Wipe the device housing with a moist cloth.
3. Rinse the water tank (7) regularly and empty it after rinsing.
STORAGE
1. Switch off the device using power switch (5) and unplug power cable from the mains socket.
2. Empty the water tank (7).
3. Wait for the steamer to cool down. Carefully wind the power cable around the device.
4. Always store the device in an upright position on a stable surface.
5. Do not place the device near heat sources or in direct sunlight.
6. Always make sure that steam openings are clean and free from impurities.
TROUBLESHOOTING GUIDE
Problem
The steamer does not heat up
The steamer does not produce steam
Water spills from the water tank
The steamer is producing a loud humming or
pumping sound
The steamer does not seem to be removing creases
easily
Unsure when to use the fabric brush
Avoiding discolouring of metal accessories on the
garment
Possible solution
Check main plug is inserted correctly.
Check power supply.
Check power button.
Check the water level and the water tank inlet cover is properly covered.
Press the steam activation button harder.
Hold the steamer in an upright position.
Make sure water is not over the MAXIMUM level.
Make sure water tank inlet cover is properly closed.
Always use the steamer in an upright position as per the operating
instructions.
Check water level; if there is no water or it is low , refill the water tank.
Hold the steamer in an upright position and stretch the fabric downward to
ensure best results.
Use when steaming is to directly touch the fabric.
When steaming delicate fabric, such as silk to reduce the risk of water
dripping onto the garment while steaming.
Do not directly hover the garment steamer over the metal accessories.
Use caution and steam around the metal accessories.
EN
23