Descargar Imprimir esta página

MPM MTO-07 Manual De Instrucciones página 16

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
EN
- Do not use the toaster without the breadcrumb tray. Clean the
tray regularly. Do not let too much breadcrumbs accumulate on
the tray.
- Caution! The temperature of the device's surfaces may be higher
during operation. Pay special attentions so as not to get burnt.
- Warning! Do not attempt to dislodge blocked toasts, slices of
bread, pieces of bagels etc. with a knife or other utensils, because
making a contact with the device's live elements may lead to
fatal electric shock.
- Caution! The equipment is not designed to operate using external
timers or a separate remote control.
- Keep the device and its cord out of reach of children under 8
years of age.
- Before touching the plug or the toaster, make sure your hands
are dry.
- The device is intended for domestic use only.
DEVICE DESCRIPTION
1.
Housing
2.
Timer knob (1-7)
3.
Breadcrumb tray
4.
STOP button, for interrupting the
operation
5.
Warm-up button
6.
Defrosting button
BEFORE FIRST USE
1. Before using the toaster for the first time, check the toasting chambers and make sure there are no
packaging materials or other items inside.
2. Use a soft, damp cloth with a gentle cleaning agent to wipe the toaster's external surfaces. After-
wards, let the device to dry completely.
3. Unpleasant odour or light smoke may appear when using the toaster for the first time. This is not
a dangerous situation and does not mean the toaster is faulty. This is a normal occurrence for new
devices. The odour should subside after several uses.
CAUTION! Before using the toaster for the first time, remove all protective film! The bread
should be divided so that it easily fits in the toaster - do not insert excessively large pieces into
the toaster, as it may cause injuries or electrical shock! Do not insert any items into the toaster!
THE TOASTER IS EQUIPPED WITH A BREAD CENTERING SYSTEM.
CAUTION! Next to the function buttons(
sponding function is selected. To activate a specific function, first press the lever and then a cor-
responding button. A LED located next to a button
16
7.
Anti-slip feet
8.
Lever for lowering toasts
9.
Power cord winding location
10. Toasting chamber, for various sizes of
bread
11. Bread centering system
,
) there are LEDs which light up when a corre-
5
6
, light up when the lever is pulled
4
down.
8

Publicidad

loading