HEATER INSTALLATION.
The heater must be installed and used in accordance with the safety standard.
The installation must be carried out by a qualified person to avoid a danger.
¡Important!
Make sure there are no electrical cables or other installations
(for example, water pipes) near the drilling holes.
- Make sure that the appliance is securely and vertically adjusted to the wall.
- Open two holes in the wall 2 m from the ground and more than 25 mm from the corners.
- Insert a fixing pad in each hole of the same diameter of the open hole.
- Screw one screw into each stud, leaving the screw head about 10mm out.
- Hang the machine, making sure that the screws are firm.
CONTROL PANEL.
1. Led Display.
2. Week Timer.
3. Auto. ("
Open window" Function).
4. 24 hours Timer.
5. Delay.
6. Option 2000W / Optión "Hours".
7. Fan / "Minutes".
8. Option 1000W / Option "Week".
9. Power.
10. On/Off button.
11. Mode button.
12. Timer button.
13. Remote Control Receiver.