Thulos TH-FHW110 Manual De Instrucciones página 13

8. When we have programmed the power on and off of the 7 days a week,
we proceed to program the temperature that is wanted for each day.
To do this, follow the next steps:
- The light (9) "Power" and the light (2) "W-Timer" must be on.
This indicates that the device is programmed.
- Press the "Delay" button.
The default temperature of day 1 (Monday) appears on the display.
To select another temperature, select with the "-" and "+" keys.
- We press the "Delay" button again.
The default temperature of day 2 (Tuesday) appears on the display.
Likewise, to select another temperature, select with the "-" and "+" keys.
- And so on until you get to the 7th (Sunday).
Select the desired temperature for day 7.
Wait a few seconds until it is fixed.
**"Open Window" Function. (Function is activated with the "Auto" button on the remote control).
- This function works with intelligent models of energy saving.
- The device checks and records the ambient temperature immediately.
- The device will turn off automatically when it verifies that the environment is ≧ 3 ℃.
- To activate the function press the "Auto" button, the light (3) "Auto" will light up.
- To deactivate the function press the "Auto" button again and the light (3) "Auto" will turn off.
**Delay Function. (Only activated by the remote control).
1. Press the "Lock" button.
2. Press the "Delay" button. The "I / W" light comes on to select the day of the week.
Select the day from 1 to 7 (Monday ... Sunday) with the "-" and "+" keys.
3. Press "Delay" again and the "II / H" light goes on to select the remaining hours
for automatic ignition, according to the time you want it to turn on.
4. Press "Delay" again for the last time and the programming is fixed.
** Child Lock Function. (Only activated by the remote control).
- This function is used to block the functions and control of the device.
- Press the "Lock" button once, all the lights and the LED screen are blocked.
- Only the "Power" light remains on.
- In this condition, both the control panel and the remote control can not be used.
- To deactivate the function and everything works again, press the "Lock" button again.
CLEANING AND MAINTENANCE
- Very important to keep the device clean at all times.
- Periodically clean the upper and lower ventilation grilles.
- The ventilation grilles can never be obstructed by accumulation of dust.
- Before cleaning the appliance, always disconnect from electrical power.
- Clean with a cloth slightly moistened in water with a neutral soap.
- Dry with absorbent kitchen paper.
- If the appliance takes a lot of moisture from the shower mist, dry it with absorbent paper.
- Never use abrasive products or chemical products to clean the appliance.