cecotec ROCKSTAR 890 X-TREME ERGOFLEX Manual De Instrucciones página 26

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Battery
2. Digital display
3. Handle
4. Setting button
5. On/off and power switch
6. Dust tank release trigger
7. Dust tank
8. Vacuuming tube release button
9. Flexible tube
10. Vacuum cleaner brush head release button
11. Rotating brush releasing button
12. Vacuum cleaner brush head
13. Accessory for corners
14. Accessory for furniture
15. Jalisco brush
16. Charging base and accessory holder
17. Battery release button
18. Mode knob
19. Accessory for upholstery
Fig. 2
1. Motor speed
2. Battery power
3. Full dust tank indicator
4. Rotating brush blockage
5. Auto mode
6. Eco mode
7. MAX mode
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
- Take the product out of the box.
- Remove all packaging material. Save the original box.
50
- Make sure all parts and components are included and in good conditions. If any visible
signs of damage are observed, contact the Cecotec official Technical Support Service
immediately.
Box contents
- Conga Rockstar 890 X-Treme ErgoFlex vacuum cleaner
- Wall bracket
- Flexible tube
- Jalisco brush
- Accessory for corners
- Accessory for furniture
- Accessory for upholstery
3. PRODUCT ASSEMBLY
Vacuuming tube and brush head assembly. Fig. 3
- To install the brush head into the vacuuming tube, match both parts ensuring the tab on
the floor brush matches the guides on the tube, and introduce the tube into the brush head
until they are firmly fixed.
- To disassemble them, press the brush head release button and pull from the vacuuming
tube while you hold the brush head.
Warning
When assembling these two parts, make sure the handle and the brush head are facing the
same direction.
- Use the flexible tube to reach and vacuum dirt from the most inaccessible zones.
- Press the flexible button to bend the tube.
Vacuuming tube, brush head and main body assembly. Fig. 4
To complete the installation of the device, hold the vacuuming tube with the brush head
assembled upright and introduce the tube in the main body.
Assembly of the main body and battery. Fig. 5
- To assemble the battery, insert it in the hole in the end of the main body.
- To disassemble the battery, press the battery release button and pull outwards to remove
it.
Dust tank assembly. Fig. 6
- To make the dust tank assembly and disassembly easier, we recommend you separate first
ENGLISH
CONGA ROCKSTAR 890 X-TREME ERGOFLEX 51