Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
Levelling the machine
Warning!
• The lock nuts on all four feet must be screwed tightly against the
housing.
Connect the water supply hose
Warning!
To prevent leakage or water damage, follow the instructions in this chapter.
• Do not kink, crush or modify water inlet hose.
Note!
• Connect manually, do not use tools. Check if the connections are tight.
Drain Hose
Warning!
•
Do not kink or protract the drain hose.
Position drain hose properly ,otherwise damage might result of water
•
leakage.
It is not allowed to remove the buckle of drain pipe.
•
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a
spanner. Make sure the machine is level
using a spirit level.
Connect the water
supply hose to the
water inlet valve and
a water tap with
cold water as
indicated.
13
V .1
Publicidad
