Honeywell HT09CESAWK Manual De Instrucciones página 18

USE AND OPERATION (CONTINUED)
FUNCTION BUTTONS (CONTINUED)
SLEEP MODE
Sleep Mode is for energy-saving comfort during the night. When Sleep Mode
Conditioning Cooling Mode, the fan will automatically stay on LOW Speed and the set temperature
will increase by 2°F (1°C) on the first hour. It will increase another 2°F (1°C) on the second hour, and
remain at this temperature for the rest of the night, until Sleep Mode is deactivated.
When Sleep Mode
the set temperature will reduce by 2°F (1°C) on the first hour. It will reduce another 2°F (1°C) on the
second hour, and remain at this temperature for the rest of the night, until Sleep Mode is deactivated.
TIMER CONTROL
While the unit is turned on, press the timer button then press the
hours you would like the unit to continue to run. Then press timer button again to confirm, The unit
will turn off automatically.
AUTO TURN OFF:
While unit is running, press the
run in air conditioning mode.
AUTO TURN ON:
When unit is in a standby mode, then press the
you want the unit to automatically start running.
SWING CONTROL
Press button on the remote control to activate automatic oscillation of louvers. The
light will be illuminated on the control panel. Press
have reached your desired angle.
Note: In order to avoid damaging the internal mechanisms, the louvers must not be moved manually.
Note: After switching the air conditioner off, you must wait 3 minutes before switching it back on.
WATER FULL LIGHT
Condensate may accumulate in the unit.
If the internal tank becomes full, the Water Full
Error Code will be displayed on the screen to indicate that the tank is full. The unit will not operate
until the tank has been drained (refer to the "Water Condensate Drainage" section).
WI-FI MODE^
When the Smart Local Air Conditioner is connected to the wifi function, the
be illuminated.
^THIS IS ONLY FOR MODEL HT09CESV** / HT12CESV** / HT13CESV** WITH WI-FI SMART
FEATURES.
ADDITIONAL FEATURES:
AUTOMATIC DEFROST FEATURE
Sometimes when the unit is operating in cooling mode in lower room temperatures (e.g. lower than
60°F), the internal cooling coils may become too cold and sometimes frost may develop on the
cooling coils. When this happens, the unit will automatically pause operation and defrost the cooling
coils to protect the unit. The air conditioner will restart automatically when the system has defrosted
and returns to standard operational temperatures.
is ON in Heating Mode*, the fan will automatically stay on LOW speed and
or button to select the number of hours you want the unit to
*Applicable for models with heating feature only.
or button to select the number of hours until
button again to stop the swing when louvers
Light will illuminate. After 5 minutes, an "E2" / "E4"
EN 10
is ON in Air
or to select the number of
indicator
indicator light will