PROUSER IBC26000B Modo De Empleo página 16

Connecting your IBC charger to your Bluetooth enabled smartphone
Note:
iOS 8.0 or later, or Android 4.4 or later and a mobile device with Bluetooth BLE Ver. 4.3 or later is needed
to connect to the charger
1. Download and install the free "Pro-User Check & Charge" App from Apple App Store or Google
Play Store.
2. Make sure Bluetooth is enabled on your smartphone.
3. Connect charger to the mains and make sure the unit is powered on.
4. Open "Pro-User Check & Charge" App.
5. Check the App´s "Settings"- and take the desired settings you need (Background Refresh and
Notifications)
6. Select the device you want to connect to. Make sure the section "Charger" is selected. You may
want to connect more than 1 charger or battery tester.
7. Change the settings as required.
Congratulations !
Now you can control your battery charger and check the status of your battery in a very convenient way.
The app is easy to use and gives you all the information you need to know about your battery status
and your chargers parameters.
Note:
The app delivers only some information about the charging modes. Always use this manual as a
reference, if you are unsure what mode to select.
Password:
If you have more than one charger, you may want to rename the device or set your own password for
the connection. The password is automatically stored in the app. The default password is: 123456
If the Password is forgotten, you can reset the charger to the default password by pressing the
MODE-button for more than 5 seconds.
Note: The password of an optional Pro-User IBT Battery Tester is not changeable. It consists of the
unique product key printed on the device
Bluetooth Connection:
If you put your smartphone to sleep or the Bluetooth connection was interrupted in another way, it is
possibly required to wait for some seconds and to connect to the charger again (Pull to refresh the device
list). Usually no password is required as the password is stored in the app.
16
BLUETOOTH CONNECTION