PROUSER IBC26000B Modo De Empleo página 9

Charging
Your Pro-User IBC charger can easily be configured to charge many different types of batteries. The
following recommendations should, however, only be seen as guidelines. When in doubt, always consult
the battery manufacturer for further instructions.
Starting the charging process:
1. Once you have established that the battery clamps or eyelets have been correctly
connected, you can start the charging process. To do so, insert the charger plug into the AC
socket.
2. The charger will start in Standby mode, indicated by the STAND BY LED.
3. Press the mode button to select the appropriate charge mode (press and hold for three
seconds to enter an enhanced charge mode) for the voltage and chemistry of your battery.
The selected charge mode LED will illuminate.
Charging Modes.
The IBC26000B has twelve (12) modes. The Lithium and Recover charge modes require the mode
button to be pressed and held for three (3) seconds to enter the enhanced mode. These "Enhanced"
modes require your full attention before selecting.
NEVER USE RECOVER MODE ON LITHIUM IRON PHOSHATE BATTERIES .
Do not operate the charger until you confirm the appropriate charge mode for your battery.
Below is a brief description:
For charging 12-volt batteries in cold temperatures below 50°F (10°C) or AGM batteries. When selected, the
For charging 24-volt Flooded, Gel, Maintenance-Free batteries. When selected, the LCD will illuminate.
For charging 24 volt batteries in cold temperatures below 50°F (10°C) or AGM batteries. When selected, the
For recovering and repairing and storing, old, idle, damaged stratified or sulfated Flooded, Gel, Maintenance-
Charging Modes
For charging 12-volt Flooded, Gel, Maintenance-Free batteries.
14.4V
14.7V
28.8V
29.4V
For charging 12 volt advanced AGM batteries that require a higher than normal charge voltage. When
15V
Free Lead Acid batteries. When selected, the LCD will illuminate.
NEVER USE RECOVER MODE ON LITHIUM BATTERIES
14.7V
For charging 12.8-volt lithium iron phosphate batteries. When selected, the LCD will illuminate.
14.4V
12V NORM
26A
12V COLD/AGM
LCD will illuminate.
26A
24V NORM
13A
24V COLD/AGM
LCD will illuminate.
13A
12V AGM+
selected, the LCD will illuminate.
30A
12V RECOVER
Press & Hold Mode
5A
12.8V LITHIUM
Press & Hold Mode
26A
50-500Ah Batteries
50-500Ah Batteries
25-250Ah Batteries
25-250Ah Batteries
50-500Ah Batteries
50-500Ah Batteries
30-200Ah Batteries
9