Publicidad
• Place the equipment on a dry, firm, flat and level surface.
• Connect one end of the suction hose (not included) to
the water inlet of the motor pump (A) and the other end
of the hose to the filter (B).
• Connect the discharge hose (not included) to the water
outlet of the pump (C).
CAUTION
• All connections must be secured with
suitable clamps (D).
CAUTION
• The hoses must be continuous without
kinks in their structure. The length of the suction hose
should not exceed the length allowed for the pump to
operate properly.
• It is essential to use the filter (B) to
CAUTION
prevent particles from entering the system and damaging
the pump.
• Immerse the end of the suction hose with the filter
attached in the water source to a minimum depth of 3.2 ft
8
ENGLISH
C
A
B
Installation
D
Publicidad
