EN
Installation
Troubleshooting
Problem
doesn't work.
The temperature inside
the appliance is not
cold enough.
The temperature
within the appliance
is too cold.
The inner surfaces of
the appliance are wet.
Presence of
The doors do not
The appliance makes
noises including the
sound of flowing liquid.
213294_s1_s15_5059340169491-5059340169613-No Brand-A5-SM-Multi-V04.indd 29
Solution
Check the appliance is switched on.
Check that there has not been a power cut.
Check that the plug and mains outlet are working correctly.
Check that the fuse has not blown.
Check that the voltage is correct for the appliance.
Do not over fill the appliance.
Adjust the thermostat.
Check that the appliance is not placed in direct sunlight, or too near to a
heating source.
Check that the ambient temperature is within the operation limits of the
appliance.
Ensure the doors are kept open for the shortest time possible.
Adjust the thermostat.
Only use the coldest setting for rapid cooling to avoid using the compressor
constantly.
Condensation has formed, wipe dry and adjust the thermostat.
Dispose of out of date food or repackage into sealed containers.
Clean the appliance regularly and remove any spillages immediately.
Ensure the internal drainage hole is not blocked.
Ensure there are no items blocking the doors and all seals are correctly intact.
This is perfectly normal and is the sound of the coolant flowing through
between the wall and the rear of the carcass.
29
17-09-2021 16:18:57