Publicidad
Idiomas disponibles
Idiomas disponibles
IP FIGURES
The first digit (IP_ _) indicates the protection from solid objects.
0: Non protected
1: Protected against solid objects Ø ≥ 50mm
2: Protected against solid objects Ø ≥ 12mm
3: Protected against solid objects Ø ≥ 2,5mm
4: Protected against solid objects Ø ≥ 1mm
5: Dust protected
6: Dust tight
The second digit (IP_ _) indicates protection from moisture.
0: Non protected
1: Protected against dripping water
2: Protected against dripping water when tilted up to 15º
3: Protected against dripping water when tilted up to 15º
4: Protected against splashing water
5: Protected against water jets
6: Protected against heavy seas
7: Protected against the effects of immersion
8: Protected against submersion
INSTALLATION INSTRUCTIONS
Fistly, please install the solar panel brackets on solar panel, using the
following fittings in order.
1. Solar panel bracket
2. Hex screw
Instruction manual
3. Flat gasket
4. Spring washer
5. Wing nut
Secondly, please use expansion screws to install solar panel and lamp
on the wall.
Note: there is no battery in the remote controller, it will need 2
pieces AAA batteries when use.
▶This projector is mostly installed on the wall, and can also be used
▶As shown in the picture below, install the solar panel on the wall
▶As the drawing below shows, the LED projector bracket can be
▶After installation, connect the power cord of the lamp and the
9
on other supports.
and rotate the solar panel bracket to orient it at the proper angle
towards the sun. Let the solar panel receive direct sunlight as much
as possible and do not interfere or create shadows by buildings or
trees. The best charging effect can be achieved only when the solar
panel is installed/placed correctly oriented, so we can guarantee
the longest irradiation time. The solar panel must never be installed
indoors.
installed at 280°. They can be placed at different angles according
to your needs to meet the direction of lighting.
ref. 31855
ES
PT
EN
FR
Publicidad
