DAY 69660 Manual De Instrucciones página 19

under a wall socket.
Do not connect the appliance using an
on/off timer or other equipment which
can automatically switch on the device.
The appliance must not be placed in
rooms where flammable liquids or gases
are used or stored.
If an extension cord is used, it must be
as short as possible and always be fully
extended.
You must not connect other appliances
to the same mains socket as this appli-
ance.
Keep the appliance clean at all times,
and never insert objects in the air intake
or the air outlet, as this may cause
electrical shock, fire or damage to the
appliance.
Not for use in rooms less than 4 m
The appliance is not suitable for use
outdoors in damp weather, in bath-
rooms or in other wet or damp environ-
ments.
Unplug the appliance prior to cleaning.
The symbol means that the appli-
ance must not be covered.
Never pull on the cord.
Caution: If the cord is damaged, it must
be replaced by a qualified repairman to
avoid hazards.
Children must not play with the appli-
ance, and cleaning and maintenance
must not be performed by children
unless they are supervised.
Keep children and pets away from the
appliance when it is turned on, as it will
get very hot.
The appliance must be kept out of the
reach of children under 3 years of age
unless they are kept under constant
supervision.
Children between the age of 3 and 8
may only switch the appliance on and
off if it has been positioned or installed
in the intended normal operating posi-
tion, and they are monitored or instruct-
ed in safe use of the appliance and they
understand the associated risks.
Children between the age of 3 and 8
must not plug the appliance into a pow-
er socket or control the appliance.
Caution: Some of the parts of the appli-
ance may get very hot and so represent
a risk of burning. Be aware of this when
children or infirm people are nearby.
Always unplug the appliance when not
in use.
USE
Position the fan heater so that it stands
upright on a firm surface and at a safe
2 . distance from wet environments and
flammable objects.
Connect the fan heater to the mains.
Set the thermostat button to the maxi-
mum temperature.
The fan heater comes on when the
function selector is set to circulation
without heat, 1,000 W fan heating or
2,000 W fan heating. The indicator
comes on when the fan heater is run-
ning.
Once the room reaches the required
temperature, you should turn the ther-
mostat button clockwise until the fan
heater switches off with a little click.
The fan heater now starts and stops
automatically and thus keeps the room
temperature constant.
The fan heater is switched off by setting
the function selector to "Off ".
19
GB