Truper ESMA-4-1/2A7 Instructivo página 20

• Before cleaning the tool verify it is unplugged.
• Never use water or other liquids. Use only a brush.
• To avoid overheating of the motor, clean the ventilation slots regularly.
• Double-check all the tool components are securely fastened.
• The housing should not be cracked or damaged.
• After a prolonged use the grease on the tool head should be replaced in a
Authorized Service Center.
Repairs
• Use only spare parts and accessories recommended by the manufacturer. In
case the tool is not working, repairs should be done in a
Authorized Service Center.
Carbon brush replacement
• Check carbons periodically. When worn, they should always be replaced in a
Authorized Service Center.
• After replacement, ask the technicians to inspect if the new carbons can move
freely in the carbon housing and to leave the tool running for 5 minutes to
even the contact of the carbons and the commuter.
• Use only original
designed with the right strength and electric resistance for each type of motor.
Carbon brushes with different specifications may damage the motor.
• When replacing carbon brushes always change both of thems.
Storage
Neatly store the tool in a dry place and protected from dust and water .
8
ENGLISH
spare carbon brushes, specifically
Maintenance