Publicidad
Idiomas disponibles
Idiomas disponibles
Detaching/Reattaching the Sun Visor
The sun visor is already attached to the helmet.
• To remove the visor, carefully pull the visor away from the snap on one side of the helmet and then
pull it away from the snap on the other side. (5)
• To reattach the visor, align the snaps on each side of it with the snaps on the helmet and carefully
press them together so that the visor is secure. (6)
5
Care & Maintenance
Maintenance
All of the snaps and plastic parts on the helmet should be inspected periodically to ensure that they
are secured properly and not damaged or malfunctioning.
Any missing, broken, or worn components should be replaced immediately, and the helmet should
not be used until they are replaced. Only original manufacturer's components should be used. If
needed, please contact Joovy at our toll-free phone number (877) 456-5049.
Cleaning
Only use a soft towel, soap and warm water to clean your helmet. You can remove and clean the
pads by hand and re-insert them after they air dry. The use of solvents and solvent based paints or
similar solvent-based materials can damage your helmet. We recommend not making any
modifications to or decorating the helmet after you have purchased it. The addition of stickers and
painting the surface is not recommended. The helmet can also be damaged if exposed to extreme
changes in hot or cold temperatures. Store your helmet in a cool, dry place.
6
6
Publicidad
