Publicidad
Idiomas disponibles
Idiomas disponibles
EMPTYING THE WATER COLLECTION TANK
Using the bottom drain port
When the internal water collection tank is full, FL
will appear in the display and the air conditioner
will turn off until the tank is emptied.
Unplug the air conditioner, disconnect
1
the exhaust hose from the back, and move
the air conditioner to a suitable drain
location or outdoors. You may also place
a pan under the drain that will hold up
to 3 pints of water.
Remove the drain cap and the rubber plug
2
from the drain outlet.
Once the water collection tank is drained,
3
reinstall the rubber plug and the drain cap,
making sure it is on securely.
Place the air conditioner in the desired
4
location, reconnect the exhaust hose, and
plug in the air conditioner.
When need dehumidification in high humidity ,During
5
the DRY mode, remove the drain plug and the exhaust
hose from the back of the unit.
6
During the dehumidifiying mode remove the drain plug and the exhaust from the back of the unit.
Install a drain hose (18mm [11/16"] inside diameter) and place the open end of the hose a suitable
7
drain location or outdoors.
FL apperars in the display
NOTICE
The water collection tank is full, drain the tank and restart the air conditioner.
When turned on after being unplugged, the air conditioner will automatically reset to
NOTES:
COOL mode, with a temperature setting of 72°F.
C A R E A N D C L E A N I N G
Drain Outlet
Note: If the water full alarm is often on, there may
be some malfunction about the unit.
Contact the professional service for help.
Drain Cap
21
Publicidad
