Linde EN ISO 2503 Manual Del Usuario página 15

EN. Cylinder pressure regulators corresponding to EN ISO 2503. Operating instructions.
8. Cylinder pressure regulators with
flowmeter gauge:
Paragraphs 1 to 7 of these Operating Instructions
applies also to Cylinder Pressure Regulators
with Flow gauge. The flow set by the Pressure
adjusting knob (5) may be read at the Flowmeter
gauge (4). Cylinder Pressure Regulator with
flow gauge have an integrated throttle. If the
apparatus or equipment to be used downstream
also has a Flowmeter device, please remove it as
it will not be calibrated with the Cylinder Pressure
Regulator.
9. Waste management
In accordance to Article 33 of REACH responsible
manufacturer shall inform all customers if
materials containing 0.1% or more of substances
included in the list of Substance of Very High
Concern (SVHC).
The most commonly used brass alloys used for
bodies and other brass components contain 2-3%
of lead (Pb). After end of life the product shall
be scrapped by an authorized metal recycler to
ensure efficient material handling with minimal
impact to environment and health.
10. Warranty
The warranty terms and conditions are set
out in the General Terms of Delivery
and Payment of the national sales organisation
of LINDE. Contact your authorized dealer for
more information. The warranty is provided only
for material defects. In the event of damage
due to improper use, no warranty or liability is
accepted. The warranty and liability also become
void if spare parts other than original spare parts
are used. Consumables are not covered by the
warranty.
Note: Pictures in this Instruction for use
are illustrative only. They may differ from the real
look of your product!
15