Publicidad
Idiomas disponibles
Idiomas disponibles
Product Specifications
Percussion Drill
Article number
Speed control
Right/Left rotation
Rated input power
Power output
Impact rate
Impact energy per
stroke
Nominal speed
Right rotation
Left rotation
Tool holder SDS-plus
Spindle collar
diameter
Number of chisel positions
Maximum drill
diameter:
Masonry
(core drill)
Concrete
Wood
Steel
Weight (without
accessories) approx.
Degree of protection
Noise/Vibration Information
Measured values determined according to EN 50 144.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level: 86 dB(A)
Sound power level: 99 dB(A)
Wear ear protection!
The typically weighted acceleration is 10 m/s
Intended Use
The machine is intended for hammer drilling in con-
crete, brick and stone as well as for light chiselling
work. It is also suitable for drilling without impact in
wood, metal, ceramic and plastic.
Machines with electronic control and right/left rotation
are also suitable for screw driving and thread cutting.
1 619 929 637 • (03.12) T
BTI-BH 2-24 ME
016323
G
G
[W] 680
[W] 390
[per min] 0 ... 4850
[J] 2.4
[RPM]
0 ... 870
[RPM]
0 ... 500
G
[mm] 43
(Euro-Standard)
36
[mm]
68
[mm]
24
[mm]
30
[mm]
13
[kg] 2.4
/ II
2
Product Elements
The numbering of the product elements refers to the
illustration on the foldout page.
1 Tool holder (SDS-plus)
2 Dust protection cap
3 Locking sleeve
4 Locking button
5 On/off switch
6 Right/Left rotation switch
7 Operational mode selection switch
8 Unlocking button
9 Auxiliary handle
10 Depth stop
11 Drill chuck*
12 SDS-plus drill chuck shaft*
13 SDS-plus adapter*
14 Winged screw, depth stop
* Not all the accessories illustrated or described are in-
cluded in standard delivery.
.
If the cable is damaged or cut through while work-
I
ing, do not touch the cable but immediately pull the
mains plug. Never use the machine with a dam-
aged cable.
Connect machines that are used in the open via a
I
residual current device (RCD) with an actuating
current of 30 mA maximum. Do not operate the
machine in rain or moisture.
Always direct the cable to the rear away from the
I
machine.
English–1
For Your Safety
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions
contained therein are strictly fol-
lowed.
Additional safety information can
be found in the "General Safety
Rules" Section in this handbook.
Before using for the first time, ask
for a practical demonstration.
Wear ear protection to prevent damage
to your hearing.
Wear safety glasses.
For long hair, wear hair protection.
Work only with close-fitting clothes.
Publicidad
