Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: The remote control has already been
paired to the ceiling fan for your convenience.
If you have two of the same model fans in
your home, please follow the steps below to
control each fan independently.
1. Remove the battery cover and install 12V
battery.
2. Press the fan on/off button for 5 seconds
then release , If pairing is successful light
kit will flash two times and blades will
begin to spin.
Remote Control - Your fan is equipped with a
remote control to operate the speed and lights
of your new ceiling fan (Figure 18).
Key -
High speed
Key -
Medium speed
Key -
Low speed
Key -
Light on/off and dimmer (press
and hold to dim light)
Key -
Fan On/Off
Speed settings for warm or cool weather depend
on factors such as room size, ceiling height,
number of fans, and so on.
The fan shipped from the factory with the reverse
switch positioned to circulate air downward.
If airflow is desired in the opposite direction,
turn your fan off and wait for the blades to stop
turning, then slide the reversing switch (located
at the top of shade, refer to figure 19 and figure
20) to opposite position, and turn fan on again.
The fan blades will turn in the opposite direction
and reverse airflow."
Warm weather - (Forward) A downward air
flow creates a cooling effect as shown in Figure
19. This allows you to set your air conditioner on
a higher setting without affecting your comfort.
Cool weather - (Reverse) An upward air flow
moves warm air off the ceiling are as shown in
Figure 20. This allows you to set your heating
unit on a lower setting without affecting your
comfort.
Model:UC7085T
FCC ID:CHQ7085T
IC:2968A-7085T
Complies with Canada
RSS-210
MADE IN CHINA
Airpro
R
12V
10. Operating Your Fan
Figure 18
Figure 19
Figure 20
Publicidad
