Publicidad
Idiomas disponibles
Idiomas disponibles
Sawing with the E-Cut saw blade
!
Risk of injury
the sawing teeth are very sharp. Do not touch
during mounting and application.
Before sawing make sure that no live
cables will be damaged.
The workpiece must be inserted firmly or
clamped tightly before it is processed.
Typical application: wood, plaster board
and soft plastics. Not suitable for metal
(e. g. nails) and stone.
Only clamp the E-Cut saw blade and saw
in a straight position. For fixation use a
tightening screw with a large disc. Care-
fully remove the protective coating.
Always set the E-Cut saw blade straight (at
90°) and guide it in the gap without tilting.
Always guide the E-Cut saw blade along
the cutting line without exerting any pres-
sure.
When plunging and sawing with a slight
pendulum motion, make sure that suffi-
cient chip removal is provided for.
Keep a certain distance away from hard
metals (stone/metal) (approx. 3 mm),
since there is increased danger of the
outer saw teeth breaking off.
Scraping
Typical application: Scraping off old var-
nish or adhesives. Removing glued carpet-
ing, e. g. on stairs or other small to
medium-sized surfaces.
Select medium/high/oscillation fre-
quency.
Cleaning and care.
!
Risk of injury
by switching the tool ON unintentionally.
Before cleaning, pull out the mains plug.
Carry out the following once a week, or
more often if the power tool is used more
frequently:
Clean the venting openings.
Blow out the motor space from outside
with dry compressed air.
Maintenance and repairs.
!
Risk of injury
Service, testing and repairs may only be car-
ried out by electrical engineers in conformity
with the regulations valid in the respective
country.
Maintenance and repairs.
!
Risk of injury
Before any work on the machine itself, pull
the mains plug.
If the machine should fail despite the care
taken in manufacturing and testing proce-
dures, repair should be carried out by an
after-sales service centre for BTI power
tools.
In all correspondence and spare parts
orders, please always include the 6-digit
order number given on the nameplate of
the machine.
English - 3
Publicidad
