Silvercrest SSP 2600 A1 Instrucciones De Uso página 32

Attaching a compact camera to the
selfie stick
♦ Unscrew the mount 1 from the tripod head .
♦ Screw the compact camera onto the thread of the
tripod head 3 .
♦ Set the horizontal alignment of the compact camera .
Undo the fastening screw 4 on the mount by turning
it to the right . Turn the fastening screw 4 to the left
to lock the compact camera into this position .
♦ Set the vertical tilt angle of the compact camera .
Loosen the fastening screw hinge joint w on the
mount by turning it anticlockwise . Lock the compact
camera into this position by turning the fastening
screw hinge joint w clockwise .
Taking selfies
Pull out the telescopic shaft 5 to the desired length .
Turn the individual elements of the telescopic shaft 5
clockwise to lock them in place .
♦ If you want to unlock the telescope shaft 5 turn
the individual elements in the opposite direction
(anticlockwise) .
♦ Turn the camera function of the smartphone on . If
you are using a compact camera, make the required
photo settings on the compact camera .
♦ Press the photo button 6 on the selfie stick . Your
smartphone or compact camera will take a photo .
The Bluetooth
an active Bluetooth
Turning off the appliance
♦ Press the On/Off button 8 for 2 seconds to turn
off the selfie stick . The Bluetooth
three times .
NOTE
► The appliance turns off automatically after around
5 minutes, if you do not press any buttons during
this time .
SSP 2600 A1
® LED 7 flashes briefly and shows
® connection .
® LED 7 flashes
GB │ IE
│
29 ■