During Use; Symbols; Instructions; Cleaning - Multimetrix DMM 210 Manual De Instrucciones

1.1.2. During use

•
Never exceed the protection limiting values indicated in the
specifications for each type of measurement.
•
When the multimeter is connected to the circuits to be measured,
do not touch any unused terminals.
•
Before changing function, disconnect the measurement leads
from the circuit measured.
•
Never measure resistances or test diodes, etc., on a live circuit.

1.1.3. Symbols

Refer to the user's manual
Risk of electric shock
Double insulation

1.1.4. Instructions

Before opening the instrument, disconnect it from the circuits to be
measured and make sure that you are not charged with static electricity,
which could irreparably damage the instrument's internal elements.

1.1.5. Cleaning

Disconnect external circuit leads and turn the instrument off. Clean with
a damp cloth and soap. Never use abrasive products or solvents.
Make sure the instrument is perfectly dry before using it again.

1.1.6. Protection factor (PF)/Humid environment

This instrument has a PF67 protection factor, which means that it is
extremely waterproof and will not be damaged by water immersion
(when turned off). However, the instrument and its accessories must be
completely dry (including inside measurement terminals) before being
used again.

1.2. Guarantee

This equipment is guaranteed against any material or manufacturing
flaws, as specified in the general terms of sale.
During the guarantee period (1 year), the instrument can only be
repaired by the manufacturer, who reserves the right to repair the
instrument or to exchange all or part of it. If the equipment is returned to
the manufacturer, the outgoing transport costs are borne by the
customer.
18
Chapter II
WEEE 2002/96/EC directive
DMM210