Mechanical Connection - GREISINGER A-10 Manual De Instrucciones

7. Starting, operation

Mechanical connection

max.
50 Nm
For Model A-10 with straight thread the sealing ring is included in delivery.

Please refer to our data sheet "Pressure gauge sealing washers AC 09.08" in product

catalog Pressure and Temperature Measurement for details about sealing washers.
When mounting the instrument, ensure that the sealing faces of the instrument and

the measuring point are clean and undamaged.
Screw in or unscrew the instrument only via the flats using a suitable tool and the

prescribed torque. The appropriate torque depends on the dimension of the pressure
connection and on the sealing element used (form/material). Do not use the case as
working surface for screwing in or unscrewing the instrument.
When screwing the transmitter in, ensure that the threads are not jammed.

For tapped holes and welding sockets please see Technical Information IN 00.14

Types of sealings
according to EN 837
NPT, R and PT are self-sealing thread types.
Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio
Product label (example)
S #
P #
according to DIN 3852-E
Power Supply
Signal
Serial No.
Product No.
Coded manufacture date
PIN assignment
according to NPT
GB
7
A-10