Publicidad
Idiomas disponibles
Idiomas disponibles
Setting the equalizer
You can select an equalizer curve for 7 music
types (Xplod, Vocal, Club, Jazz, New Age, Rock,
and Custom).
You can store a different equalizer setting for
each source.
Selecting the equalizer curve
VOL control dial
1
Press (SOURCE) to select a source
(radio, CD, MD, or AUX).
2
Press the VOL control dial repeatedly
until "EQ7" appears.
3
Rotate the VOL control dial to select
the desired equalizer curve.
To cancel the equalizing effect, select "off."
After 3 seconds, the display returns to the
normal playback mode.
Note
When DSO is set to on, equalizer settings are
automatically adjusted for best overall effect.
Adjusting the equalizer curve
You can store and adjust the equalizer settings
for frequency and level.
1
Press (SOURCE) to select a source
(radio, CD, MD, or AUX).
2
Press (MENU), then rotate the
./> control dial until "EQ7 Tune"
appears.
3
Press the ./> control dial.
4
Press the –m or M+ button to
select the desired equalizer curve,
then press the ./> control dial.
Each time you press the –m or M+
button, the item changes.
5
Select the desired frequency and level.
1 Press the –m or M+ button to
select the desired frequency.
Each time you press the –m or M+
button, the frequency changes.
62 Hz y 157 Hz y 396 Hz y 1.0 kHz
y 2.5 kHz y 6.3 kHz y 16 kHz
2 Rotate the ./> control dial to
adjust the desired level.
The level is adjustable by 1 dB steps from
–10 dB to +10 dB.
To restore the factory-set equalizer curve,
press the ./> control dial for 2
seconds.
6
Press the ./> control dial.
After the effect setting is complete, the
display returns to the normal playback mode.
./> control
dial
23
Publicidad
