Rohde & Schwarz UD1065 Manual De Instrucciones página 22

®
R&S UD1065
3 Preparing for Use
Make sure to consider the following information before using the R&S UD1065 for
the first time.
Risk of injury and instrument damage
The instrument must be used in an appropriate manner to prevent electric
shock, fire, personal injury, or damage.
● Do not open the instrument casing.
● Read and observe the "Basic Safety Instructions" delivered as a printed
brochure with the instrument.
In addition, read and observe the safety instructions in the following sec-
tions. Notice that the data sheet may specify additional operating condi-
tions.
Risk of instrument damage
Note that the general safety instructions also contain information on operat-
ing conditions that prevent damage to the instrument. The instrument's data
sheet can contain additional operating conditions.
Risk of electrostatic discharge (ESD)
Electrostatic discharge (ESD) can damage the electronic components of the
instrument and the device under test (DUT). ESD is most likely to occur
when you connect or disconnect a DUT or test fixture to the instrument's
test ports. To prevent ESD, use a wrist strap and cord and connect yourself
to the ground, or use a conductive floor mat and heel strap combination.
For details, refer to the basic safety instructions delivered as a printed bro-
chure with the instrument.
Getting Started 1178.4176.02 ─ 02
Preparing for Use
7