Publicidad
Idiomas disponibles
Idiomas disponibles
Wireless LAN Module (Option)
Make sure the Wireless LAN module is turned on (and not
in Airplane Mode) before configuration begins.
WLAN Configuration in Windows
1. Click the icon
in the notification area of the taskbar.
2. Make sure that Airplane mode is off (the Airplane mode icon
should be gray).
3. A list of available access
points will appear.
4. Double-click an access
point to connect to it (or
click it and click Connect).
5. Enter a network security
key (password) if required,
and click Next.
6. You can choose to find
other devices or not.
7. When you are connected
to the network access
point it will display
Connected.
8. Select any connected
network and click
Disconnect to
disconnect from a
connected access point.
9. You can click the Airplane Mode button to turn the mode On or
Off.
10. Alternatively you can click the Wi-Fi button to turn just the Wi-Fi
On or Off.
Connect Automatically
It is recommended that you
check the box to Connect
automatically.
This will cause the system
to check for the access
point upon startup, and re-
suming from a power-sav-
ing state, and will remove
any necessity to keep con-
necting manually.
Bluetooth Module (Option)
Make sure the Bluetooth module is turned on (and not in
Airplane Mode) before configuration begins.
Bluetooth Configuration in Windows
1. Click the Settings item in the Start Menu and then click Devices.
2. Click Bluetooth & other devices.
3. Click Add Bluetooth & other device > Bluetooth and a list of
discovered devices will appear.
4. Double-click the device you want to pair with the computer and
click Connect.
5. Select a device and click Remove Device > Yes to disconnect
from any device.
19
Publicidad
