Aiwa ACD18-KBTU Manual Del Usuario página 12

There are 3 methods to add the device.
2-AP MODE
1. Power on the indoor unit, no need to launch
the air conditioner.
2.
Click "+" in the upper right corner of the
"Home" screen or tap "Add device" on the
room which has no device.
3. Tap the "Air conditioner(BT+Wi-Fi)" logo.
4.
Tap in the upper right corner and choose
"AP Mode" then follow the comments on the
screen to reset the Wi-Fi module then check
"Confirm the device is reset" and tap"Next".
5. Input the password of the Wi-Fi which the
same as your smart phone connected, then
tap "Next".
6.
Read the instruction carefully and tap
"Connect now".
7. In the network setting screen, select
"SmartLife-****", and tap" ".
8. You can see the percent rate of connecting
process, at the same time
"PP","SA","AP" shining in turn on the indoor
display.
"PP" means "Searching the router"
"SA" means "connected to the router"
"AP" means "connected to the server"
12 Acd18-kbtu/ Acd24-kbtu
Rename the
device
Select the
location
room