Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
we hope your new tool brings you much enjoyment and
success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regulations
and VDE regulations 0100, DIN 57113 / VDE0113.
Please consider:
Read through the complete text in the operating ins-
tructions before installing and commissioning the de-
vice.
The operating instructions are intended to help the user
to become familiar with the machine and take advan-
tage of its application possibilities in accordance with
the recommendations.
The operating instructions contain important informa-
tion on how to operate the machine safely, professio-
nally and economically, how to avoid danger, costly re-
pairs, reduce downtimes and how to increase reliability
and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regulati-
ons that apply for the operation of the machine in your
country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information.
28 | GB
The machine can only be operated by persons who
were instructed concerning the operation of the machi-
ne and who are informed about the associated dan-
gers. The minimum age requirement must be complied
with.
In addition to the safety instructions contained in this
operating manual and the specific regulations of your
country, the technical rules generally accepted for the
operation of machines of the same type must be ob-
served.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions and
the safety information.
2. Device description (fig. 1 - 22)
1.
Handle
2.
ON/OFF switch
3.
Lock switch
4.
Machine head
5.
Moving saw blade guard
6.
Saw blade
7.
Clamping device
8.
Workpiece support
9.
Set screw for workpiece support
10.
Table insert
11.
Handle / Set screw for rotary table
12.
Pointer
13.
Scale
14.
Rotary table
15.
Fixed saw table
16.
Stop rail
16a. Movable stop rail
16b. Set screw
17.
Sawdust bag
18.
Scale
19.
Pointer
20.
Set screw for drag guide
21.
Drag guide
22.
Set screw
23.
Locking bolt
24.
Screw for cutting depth limiting
25.
Stop for cutting depth limiting
26.
Adjusting screw (90°)
27.
Adjusting screw (45°)
28.
Flange screw
29.
Outer flange
30.
Saw shaft lock
31.
Inner flange
32.
Laser
www.scheppach.com
Publicidad
