Lacme Secur 2100 Instrucciones De Empleo página 8

Secur 2100 / 2200 / 2300
1
2
Terminal 1 : to be connected to the EARTH connexion.
Terminal 2 : to be connected to the fence as "TOTAL POWER OUTPUT".
Secur 2400/2600/2600 D/2600 DAC
Bar-graph operation indicator of the fence.
1
Each LED indicates a level of the output voltage (Vout) of the energizer.
= Green backlight when all is well.
= Backlight flashing red when the voltage is no longer sufficient to guard, or if a fault is found by the sentinels. In this case
the element is in error at the flashing display.
The 2600 D Secur and Secur 2600 DAC can be associated with sentinel responders (1 to 4) for increased guard security
The responder is used to indicate the voltage at the point where it is installed.
Specific instructions for sentinel responders comes with them.
Pilot lamp - A
V 7 000 V
out
V 6 000 V
out
V 5 000 V
out
V 4 000 V
out
V 3 000 V
out
V 2 500 V
out
V 2 000 V
out
V 1 500 V
out
3
2
V
Led alarm : < 1 500 V
out
Connexion example with a sentinel responder :
Secur 2400/2600/2600 D/2600 DAC
1
Terminal 1 : to be connected to the EARTH connexion
.
Terminal 2 : to be connected to the fence as "TOTAL POWER OUTPUT".
Terminal 3 : as an option, to be connected to the fence as "REDUCED POWER
OUTPUT" as well as the return signal test.
Secur 2600 D/Secur 2600 DAC
Voltage reading
by each Sentinel responder
when installed.
8
Pilot lamp - A
3
2
Return signal LED - B
V oltage output Display