Forward An Incoming Call From Handset 1 To Handset; Conference Call; Non-Disturb Function (Donot-Disturb); Pause Unction - Daewoo DTD-7500 Manual De Instrucciones

Teléfono inalámbrico dect amplificado con teclas de memoria directa con foto y teclado parlante
Ocultar thumbs Ver también para DTD-7500:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

page.
3. Over the intercom, tell Handset 2
that an outside call is waiting.
4. Press
key on Handset 1 to
transfer the call and then press
key on Handset 1 to exit.
(Note: If within 30 seconds there is
no answer, the call will ring handset
1.)

59. CONFERENCE CALL

This allows two handsets
conferencing with the incoming
caller.
1. On Handset 1, press
answer the incoming call.
2. On Handset 1, press PAGE key
and then press "2" on the keypad to
page Handset 2.
(This also places the caller on
HOLD.)
3. On Handset 2, press
answer the page.
4. On Handset 1, press key
initiate conferencing. Both Handset
1 and Handset 2 are now connected
to the outside caller.
5. On either handset, press
end the call and return to off-line.
60. NON-DISTURB FUNCTION
(DONOT-DISTURB)
This function turns off the handset
ringer and allows the user to ignore
all incoming calls (except intercom
calls).
1. Press
and hold key for five
seconds to enter non-disturb
function and the screen displays
"NON-DISTURB".
2. To turn-off "NON-DISTURB",
press and hold
seconds.
key to
key to
to
key to
key again for five
61. PAUSE FUNCTION
During pre-dialing or one-touch
memory programming, press the
key, it will insert a 2-second pause
into the dialing sequence.

62. BARRING (TOLL RESTRICTION)

This function allows the user to
prevent certain phone number
prefix from dialing out. For example:
1 900 xxx xxxx numbers can be
restricted.
1. While off-line, press
screen displays "CALL LOG".
2.Press
key to scroll to "HS
SETTING". Press
3. Press
key to scroll to
"BARRING". Press
4. Handset screen displays "PIN?".
5. Enter PIN on keypad and then
press
to confirm (default PIN is
"0000").
6. Handset screen displays "SELECT
NUM". Press
7. Handset screen displays
"NUMBER 1". Press
8. Handset screen displays
"NUMBER ?".
9. Enter the prefix for toll restricting
(up to 4-digits is allowed).
10.Press
to confirm.
11.Press
or
another prefix (4 prefixes are
allowed).
Note: On Step 6, you may also
select "OFF" or "EXTERNAL" options.
"OFF" means no barring or blocking.
"EXTERNAL" means block all
outgoing calls.
46
key and
to select.
to select.
to confirm.
to confirm.
key to enter

Publicidad

Tabla de contenido
loading

Tabla de contenido