Hilti Nuron SL 10-22 Manual De Instrucciones Original página 19

1.5 Declaration of conformity
The manufacturer declares, on his sole responsibility, that the product described here complies with the
applicable legislation and standards. A copy of the declaration of conformity can be found at the end of this
documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-86916 Kaufering, Germany
2 Safety
2.1 Important safety instructions
Warning! Read all instructions. Failure to follow all instructions listed below can result in electric shock,
fire and/or serious injury.
Keep these instructions in a handy yet secure place.
▶ Keep your work area clean and well lit. Cluttered or poorly lit work areas invite accidents.
▶ Use the product and accessories only when they are in perfect working order.
▶ Never tamper with or modify the product or accessories in any way.
▶ Persons with reduced physical, sensory or mental abilities or lack of experience and knowledge are not
permitted to use this product.
▶ Keep the product out of reach of children.
▶ Children must receive instruction and be supervised to ensure that they do not play with the product.
▶ Do not use the product where there is a risk of fire or explosion.
▶
Do not expose the product to rain or moisture. Water entering the product will increase the risk of
electric shock.
▶ To reduce the risk of electric shock, do not use the product in wet weather, immersed in water or in any
other liquid. Set up the product in such a way that if it tips over, it cannot fall into water.
▶ Do not cover the lamp head.
▶ Do not touch hot parts on the product. There is a risk of burning injuries!
▶ Only the manufacturer or a similarly qualified person is permitted to replace the light in this light source.
Consult Hilti Service when the light source has reached the end of its life.
▶ Risk of injury by falling tools and/or accessories. Before starting work, check that the battery and installed
accessories are secure.
▶ Do not look directly into the light source and do not aim the beam at other persons' faces. Risk of
dazzling or eye injury!
▶ Wear protective gloves when setting up and taking down the tower light. Crush hazard.
▶ Do not insert foreign objects into the product.
▶ Use the lamp only with the tripod legs extended.
▶ Do not abuse the cord. Never use the cord for carrying, hanging up or unplugging the product. Keep
the cord away from heat, oil and sharp edges. Damaged or entangled cords increase the risk of electric
shock.
2.2 Careful handling and use of batteries
▶ Comply with the following safety instructions for the safe handling and use of Li-ion batteries.
Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or explosion.
▶ Use only batteries that are in perfect working order.
▶ Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely
harmful to health!
▶ Do not under any circumstances modify or tamper with batteries!
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C
(176 °F).
▶ Never use or charge a battery that has suffered an impact or been damaged in any other way. Check
your batteries regularly for signs of damage.
▶ Never use recycled or repaired batteries.
▶ Never use the battery or a battery-operated power tool as a striking tool.
▶ Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame. This
can lead to explosions.
*2384868*
2384868 English 13