Descargar Imprimir esta página

Hilti Nuron SL 10-22 Manual De Instrucciones Original página 24

Ocultar thumbs Ver también para Nuron SL 10-22:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 48
7.1
Switching on / off
1. Press the on/off button to switch the product on.
2. Press the on/off button again to switch the product off.
7.2
Selecting light area
▶ Repeatedly press the light area button until the desired area is lit up.
▶ The light area is indicated by the light area indicator.
7.3
Selecting brightness
▶ Repeatedly press the brightness button until the desired brightness is reached.
▶ The brightness is indicated by the brightness indicator.
8
Optional accessories
8.1
Supply cord
6
WARNING
Risk of injury! Water entering the equipment can lead to life-threatening electric shocks.
▶ Connect the supply cord only when you are using the product in the dry.
CAUTION
Trip hazard / fall hazard! Loosely routed power cords can lead to persons tripping or falling and/or the
tower light toppling.
▶ Route the power cord and the extension cord, if used, to the nearest grounded socket and secure them
in such a way that they does not present a trip hazard.
Optionally connect a supply cord for supplying power to the tower light.
Use only a rubber-sheathed supply cord with a conductor cross-section of at least 1.5 mm (AWG 15).
In some markets Hilti optionally offers a supply cord.
1. Open the cover of the socket on the tower light.
2. Plug the supply cord into the socket of the tower light.
3. Plug the supply cord plug into a power outlet.
A battery, if installed, can remain in the tower light. The tower light detects a connected supply
cord and disconnects the battery. The tower light does not act as a charger, the battery will not be
recharged.
9
Care and maintenance
WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance tasks!
Care of the product
Carefully remove stubborn dirt.
Carefully clean the air vents, if present, with a dry, soft brush.
Use only a slightly damp cloth to clean the housing. Do not use cleaning agents containing silicone as
these can attack the plastic parts.
Use a dry, clean cloth to clean the contacts of the product.
Care of the Li­ion batteries
Never use a battery with clogged air vents. Clean the air vents carefully using a dry, soft brush.
18
English
5
2384868
*2384868*

Publicidad

loading