Esoteric AB-T1SM1 Manual Del Usuario página 5

3
Install the arm base.
Align a positioning indentation on the
underside of the arm base with the pin
on the arm base post when installing it.
The two different positioning inden-
tations are for 9/10-inch and 12-inch
tonearms.
Referring to "Arm base installation dia-
grams" on pages 9 to 11, select the
indentation to use.
When placed correctly, the tops of the
arm base and the arm base post should
be almost the same height.
If there is a large height difference
between the arm base and the arm
base post, the positioning indentation
and the pin might not be aligned. Try
installing the arm base again.
4
Fix the arm base in place.
Tighten the arm base attachment
thumbscrew to fix it in place.
o After fixing it in place, confirm that
there is no looseness in the arm base.
5
Attach the tonearm to the arm
base.
Refer to the tonearm owner's manual
for installation procedures.
Check the illustrations on pages 9 to
11 for the screw holes to use for attach-
ing the tonearm.
6
Install the motor unit.
Following the instructions starting
with procedure 10 on page 16 of the
Grandioso T1 Owner's Manual, install the
motor unit.
5