Chicco KORY Plus i-Size Manual De Instrucciones página 42

L. Fast-in attachments
M. Stroller release buttons
N. Diagonal belt guide
O. Headrest adjustment buttons
P. Canopy
Base (Fig. 3)
A. Rebound bar
B. Isofix connectors
C. Isofix attachment indicators:
D. Isofix connector buttons
E. Support leg
F. Support leg height adjustment button
G. Leg support correct installation indicator
H. Car seat release levers
I. Car seat fastening slots
J. Indicators confirming proper attachment of car seat to base
K. 360° rotation button
L. Indicator confirming correct position for travel
M. Isofix guide
CORRECT POSITION IN THE VEHICLE
40-85 cm
The Kory Plus car seat can be installed in two different ways: with the
Full 360 i-Size base and without the Full 360 i-Size base using just
the vehicle's seat belts. The Full 360 i-Size base can be purchased
separately as an accessory.
• Configuration with the base
This is an advanced i-Size child restraint system, type approved pur-
suant to ECE R129 for use on vehicle seats compatible with the i-Size
system in accordance with the indications provided by the vehicle
manufacturer in the instruction manual for the vehicle. If in doubt,
consult either the enhanced child restraint equipment manufacturer
or the retailer.
If the vehicle does not have an i-Size seat check the vehicle compat-
ibility list, available via the QR code on the product installation label
and at the end of this manual.
• Configuration without the base
This is an advanced i-Size child restraint system, type approved pur-
suant to ECE R129 for use on vehicle seats compatible with the i-Size
system in accordance with the indications provided by the vehicle
manufacturer in the instruction manual for the vehicle. If in doubt,
consult either the enhanced child restraint equipment manufacturer
or the retailer.
INSTALLATION
Built-in harness sys-
tem + Full 360 i-Size
40-85 cm (rear-facing) base with Support
Leg OR Built-in har-
ness system + vehi-
cle seat belts
1. 40-85 cm (Max 13 kg) "Integral Universal ISOFIX "i-Size""
- installation with Full 360 i-Size base with Support Leg
rear-facing (see illustrations from number 4 to 13B)
The reducer cushion must be used from 40 cm to 60 cm.
42